Availability of Replacement Lens for Wesbar LED Tail Lights 271594 and 271595

Question

Question:

need replacement lens for wesbar 271594 and 271595

asked by: Bob B

0

Expert Reply:

According to our contact at Wesbar, the Wraparound LED Tail Light - Passenger # 271594 and Driver # 271595 referenced in your question are sealed tail lights and they do not have replacement lenses available.

If the lens or unit is damaged on your trailer, the entire light will need to be replaced.

expert reply by: Chris R

0

Answer 1

The Wesbar 271594 is a sealed light which means the lens is not replaceable. The only solution is to replace the entire light. The parent company for Wesbar recently changed, so as of May 2023 this particular light is on indefinite backorder. I…

view full answer...

Answer 2

Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…

view full answer...

Answer 3

Hi Griffin, From what I could find your Wesbar 271594 measures 7" long and 3-3/4" tall and has mounting holes 2" apart on center; a similar option that will work is the Aero Pro Combination Trailer Tail Light #ST36RB. This is…

view full answer...

Answer 4

Hey Joe, The closest light I can find to the size of your current Wesbar is the Peterson #M116A, which comes in at 5-3/8" x 1-13/16". It does use a 2 hole mount so you would need to drill another hole in order to install. We do not carry…

view full answer...

Answer 5

The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable like what you have in the picture you uploaded. Your best option is to replace the lights with new lights like part…

view full answer...

Answer 6

The Wesbar trailer light 102640 has a sealed capsule so the bulb cannot be replaced. Part 403356 is a replacement capsule but this is no longer made. It is likely to be both easier and less costly in the long run to simply replace that light with LED…

view full answer...

Answer 7

Hello John, thanks for reaching out. Yes, the mounting holes on the TecNiq Contoured Seven Function Box Style Tail Light #TN42XR (driver side) and #TN62XR (passenger side) are exactly the same as the Wesbar 271595 tail light. They are 2" apart…

view full answer...

Answer 8

I have a few options that will work for you, but the Wesbar part number that you gave, 105826, is the part number of a discontinued wraparound lens for their discontinued wraparound trailer light 403078. Unfortunately these parts are no longer…

view full answer...

Answer 9

We have had customers in the past mention that their 1999 Ranger Trail Boat Trailers like yours used Westbar Wrap around lights. For LED replacements you would want the Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible -…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Availability of Replacement Lens for Wesbar LED Tail Lights 271594 and 271595

Continue Researching