Replacement Drum Brakes For A 89 Tandem Car Hauler
Updated 05/04/2017 | Published 05/03/2017
Products Featured in This Question
Question:
Hi there I have a car trailer with 2 dexter axles under it I do believe theyre 3500# axles and the only identification I see on them at all is that on the drum there is a part number 8-247 I was hoping you could help me get some new brake assemblies for it. I need all 4 corners. Thank you much appreciated
asked by: Jesse C
Expert Reply:
The axle part numbers are generally placed on a sticker located at the center point of the axle shaft. The part # 8-247 stamped into the hubs tell me that you have a 3,500 lb axle. To replace the drum brakes on your 3,500 lb Dexter axle you will have a few options. The two options entail the use of self-adjusting or manual brakes. The self-adjusting brakes will move the adjuster screw outward as the pads wear down to ensure optimal wearing and performance of the trailer's brakes, whereas the manual brakes will need to be adjusted through time as the pads wear down.
For a manual electric brake option I recommend the Electric Trailer Brake Kit part # AKEBRK-35. These brakes have a 10" diameter and are 2-1/4" wide, compatibility with 13", 14" and 15" wheels.
If you are interested in a self-adjusting drum brake I recommend the Electric Trailer Brake Kit - Self-Adjusting part # AKEBRK-35-SA . These brakes are only marginally more expensive than the non-adjusting drums however offer a much more maintenance free option improving and lengthening the life of your brake shoes.
I also recommend you consider our Mounting Bolts and Hardware for 10" Brake Assemblies part # BRKH10A as it is suggested to replace the mounting hardware because you will already have the hubs disassembled.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub and Drum Kit for a Lippert 3,500 lb Axle
- Q&A: Replacement Hub For Lippert 3,000 lb Axle
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 126003 Hub for a Lippert 3,500 lbs Axle
- Q&A: Replacement Brake Assemblies for 2013 Keystone Cougar 1/2 Ton
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Brake Assemblies and Hubs for 1960 Airstream Trailer
- Q&A: Replacement Axle Spindle for Dexter P21-SLR with 76 Inch Spring Seats and 44649 and 68149 Bearings
- Q&A: Do You Have Brackets and Fenders for Trailer in a Bag?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs