Replacement Hardware Kit for Draw-Tite Max-Frame Trailer Hitch Receiver

Question

Question:

Does your company sell just the hardware kit needed to install a Draw-Tite hitch part number 75673 Subaru Outback?

asked by: Steve

0

Expert Reply:

We have exactly what you need.

For the replacement hardware kit to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75673 on your Subaru Outback, you will just need part # RHK. Once on the product page, you will simply type in the part number for the Draw-Tite Hitch (75673) into the box located under "Hitch Item Number" and the complete hardware kit will be assembled for you.

I have also attached the installation instructions on this hitch for you to check out.

expert reply by: Chris R

0

Answer 1

Yes, you will simply need to order the Replacement Hardware Kit #RHK for the Draw-Tite Max-Frame Trailer Hitch Receiver #75673 which fits your 2019 Subaru Outback. When you go to the product page for the hardware kit you will need to include the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Joe, The Yakima Landing Pad 13 part #Y00239 are a confirmed fit to mount in place of your factory crossbars for your 2012 Subaru Outback. However, they specifically work with SkyLine or Control towers, so they won't work with the Yakima…

view full answer...

Answer 4

Welcome back, Tee! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13410 will indeed fit your 2019 Subaru Outback. It is a bit more difficult to install than the etrailer #e98847 that attaches to the bottom of the frame, but this…

view full answer...

Answer 5

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

view full answer...

Answer 6

The trailer hitch with the best receiver depth, or bumper clearance, for your 2019 Subaru Outback is the Draw-Tite Trailer Hitch #76227 which is about 2 inches from the hitch pin hole to the edge of the bumper. This is an inch more clearance than the…

view full answer...

Answer 7

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 8

Hey Evan! That factory plug on your Ascent is only designed for a 4-way. You will need to start by adding the Curt #C56040 which plugs into that factory connection. From there, you can add the 7-Way RV Upgrade Kit for Trailer Brake Controller…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The information I have says the #306-X7162 has a ground clearance measurement of 10-1/2". The Curt #C13410 has approximately 12" to 12-1/2" of clearance when measured to the bottom of the receiver. I'm not 100% sure how accurate…

view full answer...

Replacement Hardware Kit for Draw-Tite Max-Frame Trailer Hitch Receiver

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching