Will Saris Bones Trunk Mount Bike Rack Fit on 2016 Honda CR-V

Question

Question:

Will the Saris Bones trunk mount fit the Honda CRV 2016 and will I need the alternate clips for the lower straps ?

asked by: Erin G

0

Expert Reply:

The Saris Bones Trunk Mount Bike Carrier # SA805BL will fit your 2016 Honda CR-V.

You will need to replace the lower hooks with Hatch Huggers # SA3035 or you can place the lower hooks inside the trunk. See the attached instruction manual for details.

expert reply by: Charles S

0

Answer 1

The Hatch Huggers #SA3035 are needed to replace both the top and side hooks of the Saris Bones #SA805BL on your Toyota Prius. They are needed at the top to protect the glass on your Prius that's above the hatch. Then for the side attachments…

view full answer...

Answer 2

The Saris Bones EX 2 Bike Rack #SAR83FR is a fit for all models of the 2022 Honda CR-V so it'll work great for your EXL Hybrid! Please note that your CR-V should have a function where the rear wiper turns on when you have the wipers active and…

view full answer...

Answer 3

The placement of the Hatch Huggers for Saris Trunk Mount Bike Racks #SA3035 depends on the specific vehicle and bike rack. I confirmed with Saris that you should use the hatch huggers for the side straps when using the Saris Bones EX 3 #SA803 on your…

view full answer...

Answer 4

Sorry for the confusion but the Saris Bones EX part #SAR83FR does fit all models of the 2022 Honda CR-V including the Hybrid Touring AWD.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 7

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 8

Hi Jerry, The TST website shows that their cap style sensors like part #TST47FR will work with either rubber or metal valve stems, so the rubber valve stems you have currently will work just fine. If you're still wanting to switch to metal valve…

view full answer...

Answer 9

We do! I recommend going with the Aluminum Viking Series Valhalla Trailer Wheel #TA75FR which is compatible with up to 100 psi but you'll need to swap out the rubber valve stem (only rated for up to 80 psi) to the Americana Metal, Bolt-In Valve…

view full answer...

Will Saris Bones Trunk Mount Bike Rack Fit on 2016 Honda CR-V

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching