Type of Fastener for Installing Snap-Loc E-Track Tie-Down Anchor SLSS

Updated 04/25/2017 | Published 04/24/2017

Products Featured in This Question

Snap-Loc E Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Stainless - Qty 1

(275)

$6.55

Carriage Bolt Hardware for Snap-Loc E-Track Tie-Down Anchors

(6)

$6.23

Question:

Good morning, Im thinking of buying the snaploc single etracks. My question is what type of self drilling screw do I use ? I notice I cant use nut and bolt with Washer on the side of tail gate. Thanks

asked by: Oscar

Expert Reply:

The Snap-Loc E-Track Tie-Down Anchor # SLSS can be attached to the desired mounting surface with the type of hardware is appropriate for that material. If you are mounting these to wooden surface use fasteners for wood, e.g. wood screws. For a metal surface use fasteners made for metal, e.g. self-tapping sheet metal screws. We also offer carriage bolt hardware # SLHCBDS-P.

Keep in mind that the actual weight capacity of each tie down will depend on the strength of the surface you mount it to and that of the hardware used.

expert reply by: Adam R