Replacement Surge Brake Actuator for Discontinued 6,000 lb Atwood Coupler

Updated 06/22/2020 | Published 04/18/2017

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs

(182)

$377.59

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(274)

$80.93

Question:

I cannot get the hitch to open enough to get a ball in the coupler. Atwood coupler stamped with 61101. Why is it stuck closed?

asked by: Gary W

Helpful Expert Reply:

The number 61101 isn't actually the part number, but I believe you are looking at the Atwood 84132. If this coupler is not opening enough to engage the ball, the first thing to check is the trigger lock. If it is not disengaged, the ball will not fit. If it is seized up, you will want to use some lubricant spray to try to see if you can get the mechanism to function. Unfortunately we don't have the replacement parts for that linkage as Atwood has discontinued them.

If you need to replace it with the Titan Zinc-Plated Brake Actuator # T43397007K. This will replace your discontinued coupler and allow you the electric lockout for backing up to be added # T4748800.

Let me know if you have further questions.

expert reply by: Jason S

Scott

6/15/2020

hello i have a 61101 what would be the replacement for this thanks

Chris R.

6/18/2020

The original 61101 is no longer available since Atwood no longer makes actuators, but the Titan # T43397007K mentioned above should work really well as a replacement.

Scott

6/18/2020

@ChrisR

Scott

6/18/2020

Thanks how much would it cost and will it have a lockout to back up thanks