Which Direction Should Leaf Springs Be Installed on a Trailer
Updated 04/06/2017 | Published 04/05/2017
Question:
In which direction should you mount the spring i feel that the spring captivation clip should be closest to the rigid mount or opposite of the equalizer . I am asking if the spring works better one direct or the other .
asked by: Will
1
Helpful Expert Reply:
The steel band around leaf springs, such as # e94SR, is typically installed in front of the axle. However, it doesn't really matter either way.
expert reply by:
Charles S
1
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Search Results: leaf spring bushing
- Shop: 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer leaf springs
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Double Eye Spring 6000 lbs Trailer Axle - EM48RB
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Shop: Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Q&A: Installation Direction of Leaf Springs Does the Band around the Spring Pack Go Forward
- Q&A: Are Trailer Leaf Springs Directional, Is there a Front and Back
- Q&A: Purpose of Steel Band on Trailer Leaf Springs and Which Side of Axle it Should Go On
- Q&A: Hanger Kit Recommendation for Dexter 3.5K 4-Leaf Double-Eye Spring
- Q&A: Where Does the Clip on Leaf Spring Need to be Facing When for Installation
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs: The Breakdown
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Replacement Leaf Springs and Shackles for 2014 Evergreen Amped 28FS Toy Hauler
- Q&A: What Is The Purpose Of Steel band On Leaf Springs