Will Draw Tite Hitch for 2017 Lexus NX 200t F Sport Lower Exhaust

Question

Question:

I read a review on this from another Lexus NX 200t owner and he stated that because of the way this hitch has to be installed, it drops the exhaust pipe tips 1 -1 5 inches. Ca. This be installed without having to drop the exhaust pipes?

asked by: Dana F

0

Expert Reply:

The mounting flange of the trailer hitch part # 75956 does fit between the frame and the exhaust hanger of your 2017 Lexus NX Turbo, but it should only drop the exhaust at most the thickness of the trailer hitch flange which is no where near the 1-1/2 inch that was mentioned in the review.

Worst case scenario you can take the rubber isolators that hold the exhaust with you to a auto parts store to find a shorter one to compensate for this.

expert reply by: Jameson C

0

Answer 1

I checked with Draw-Tite and Curt, and each of the trailer hitches available for your 2015 Lexus NX200t, the Draw-Tite #75956, Curt #C13337 and Curt #C12143 will fit your F-Sport model. Though none of these hitches are going to be hidden, I recommend…

view full answer...

Answer 2

The trailer hitch I recommend for your 2015 Lexus NX 200t is the Draw-Tite Class III Round Tube Receiver Hitch #75956. I like this hitch because there is no drilling required to install this trailer hitch and it has great reviews from our customers.…

view full answer...

Answer 3

The T-One Vehicle Wiring Harness part #118652 is a confirmed fit for your 2016 Lexus NX 200t. This harness actually installs inline with the factory taillight wiring harness so there will not be any sort of unused plug if that was what you were…

view full answer...

Answer 4

The problem with attaching the 12V hot wire to any 12V plug or accessory in the vehicle is that the plug you found may be on a circuit with another item in your Lexus. You really want to make sure the wiring harness is on a circuit by itself. That…

view full answer...

Answer 5

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75956 you were looking at for your 2021 Lexus NX 300 has a built in mount to connect the trailer connector to which you can see in the included pictures. If you have a…

view full answer...

Answer 6

For the 2016 Lexus NX 200t F-Sport both of the aftermarket 4-pole wiring harness kits we offer, Curt #C56268 and Tekonsha #118652, use a separate 12V power wire that will be run to the battery and connect through an included fuse holder. This…

view full answer...

Answer 7

For your 2021 Lexus NX 300 both the Curt hitch part #C13337 and the Draw Tite part #75956 are a confirmed fit for your vehicle. Either would work great but I would go with the Curt over the Draw Tite since it has higher towing capacities.

view full answer...

Answer 8

Both the Curt Trailer Hitch Receiver #C13337 and Draw-Tite #75956 are confirmed to fit your 2019 Lexus NX 300 F-sport. Between these options I recommend the #C13337 as it has a higher tongue weight rating of 525lbs, and in our experience the powder…

view full answer...

Answer 9

I have confirmed with Draw-Tite that #75956 is actually not a fit for your vehicle. The Curt Trailer Hitch Receiver Class II 1-1/4" #C12172 that you mentioned is a confirmed fit for your vehicle, however, I recommend going with the Curt Trailer…

view full answer...

Answer 10

The Draw-Tite Max-Frame Trailer Hitch Receiver #75956 you were looking at is confirmed to fit your 2018 Lexus NX 300 and will work perfectly with the Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount…

view full answer...

Answer 11

For your 2018 Lexus NX300 F Sport, you will want to use the Curt Trailer Hitch Receiver part #C13337, not the Draw-Tite Max-Frame Trailer Hitch Receiver part #75956 which is designed for a NX 200t and will not fit a NX300. The Curt Trailer Hitch…

view full answer...

Answer 12

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13337 and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75956 are both confirmed to fit your 2019 Lexus NX 300. Both offer very similar fitment and…

view full answer...

Will Draw Tite Hitch for 2017 Lexus NX 200t F Sport Lower Exhaust

Continue Researching