Will Thule Xsporter Pro Truck Bed Ladder Rack Work With Tonneau Cover On 2017 Toyota Tacoma

Question

Question:

im interesting to get a pace edward tonneau cover with their explorer rails, just want to know which cross bar yakima and / or thule will work with that cover

asked by: Yong

0

Expert Reply:

There is no bed-mount rack that will work with the Tonneau cover you said you are considering for your 2017 Tacoma. The installation of the Tonneau cover has rails that run on along the inside of the truck bed rails.

We have one ladder rack # TH500XT-XK4 by Thule that is designed to fit your Tacoma and the clamped feet for this ladder rack fit over the inside edge of the bed rails and the feet for the upright bars extend below the bed rails of the truck.

expert reply by: Jeffrey L

0

Answer 1

I believe you are looking for Toyota Tacoma clamps as the original clamps #8523159001 are a universal fit for your Thule Xsporter Pro Adjustable Height Ladder Rack like #TH500XT. If you have a 2005-2015 Tacoma, then you will want #THXK3. If you have…

view full answer...

Answer 2

I went ahead and brought the issue to my contact at Thule, and he said to either use WD-40 to spray on the available threading and use a pair of pliers to grab onto the T-Bolt while you try to rotate the knob. This will allow you to have extra…

view full answer...

Answer 3

I have the parts that work for you! I confirmed with Thule that the TracRac Base rails #TH21610 will not fit your 5-foot 6-inch bed on your 2021 Ford F-150. The correct TracRac Base Rails you need is the #TH21508. Since these base rails install…

view full answer...

Answer 4

I have a solution for you. Unfortunately, the Thule Xsporter Pro Shift Overland Truck Bed Rack - Aluminum - 600 lbs #TH54RR clamps onto the bed rails of your 2021 RAM 1500 (5-1/2 Ft. Bed without Rambox). With this type of installation style, it is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 9

For your 2023 Tacoma I recommend the B&W Tow & Stow 3-Ball Mount #BWTS10048B. This has a 5-1/2" rise and 5" drop which will cover most trailers you might tow with the truck. I would also add the InfiniteRule Locking Pins for B &…

view full answer...

Answer 10

Hey Lucas, It looks like both the Redarc #RED72CR and #RED68CR are going to include the same wire harness #RED99FR, but the #RED72CR is also going to include some mounting panels to make mounting the control knob into your dash easier so I'd go…

view full answer...

Will Thule Xsporter Pro Truck Bed Ladder Rack Work With Tonneau Cover On 2017 Toyota Tacoma

Continue Researching