Picking Out Disc Brake Kit for 1991 Ranger Bass Boat Ranger Trail Trailer

Updated 03/30/2017 | Published 03/29/2017

Question:

okay so I need to replace my brake calipers, rotors, and pads but i have not been very successful in finding what I need. Any help would be appreciated.

asked by: Rosemary B

Expert Reply:

To pick out the parts you need we would need more info from you. We don't have access to original equipment on your trailer and due to it's age it all could have been swapped out at this point.

What you are looking for is basically a whole new disc brake kit. Which we most likely have but we first have to know what capacity axles you have so that we can pick out the correct kit. Do you know what capacity axles you have? You can measure the diameter of the axle if it is round and that will help determine this.

Typical Axle Diameters Based on Axle Capacity
- 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter
- 3,500-lb Axles: 2-3/8 inch diameter
- 6,000-lb - 7,200-lb Axles: 3 inch diameter
- 8,000-lb Axles: 3-1/2 inch diameter
- 9,000-lb Axles: 4 inch diameter
- 10,000-lb Or more axles: 5 inch diameter

3,500 lb axles are the most commonly seen. If you have that the Kodiak part # K2R35DKG would be what you need.