How to Adjust Minimum Air Pressure Setting on Air Lift WirelessONE Compressor AL25870

Updated 03/15/2017 | Published 03/14/2017

Question:

How do you adjust the minimum pressure to be 10 psi instead of the factory set 5 psi? In the description is states If the air pressure in your air springs falls below the minimum safe level of 5 psi, the systems low-pressure sensor detects the decrease in air pressure. Then the compressor activates automatically to adjust pressure as needed. If your particular application requires you to maintain a minimum of 10 psi in your air springs, you can also set the system to activate when the air pressure is below 10 psi.

asked by: Shawn F

Expert Reply:

My technical contact at AirLift confirmed that the minimum pressure setting for triggering automatic re-filling of the air bags by the WirelessONE Compressor # AL25980 can be changed from the typical 5-psi to 10-psi by putting this setting into one of the three programmable presets. It is not possible to have this minimum pressure setting without using up one of the presets.

expert reply by: Adam R