Recommended Brake Assemblies For Dexter Axle 3500 lb And 5200 lb
Updated 03/09/2017 | Published 03/08/2017 >
Products Featured in This Question
Question:
Wanna replace the brakes on my trailer. Dexter Axle P- 12 SN- 01278419 Can u help me find the brake assemblies?
asked by: Brian B
Expert Reply:
I reached out the the manufacturer and found that they have two possible axles that meet that criteria. One is definitely more likely your application than the other, but I will give you both brake assembly options.
For a 3500 lb axle, you will want the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. This will give you both the left and right assemblies. There is a sticker to help you with which assembly fits which side. These assemblies are self adjusting, so only an initial adjustment is needed at install and you can use the adjusting spoon # W80630. If you need the mounting hardware, it is # BIK-00.
For a 5200 lb axle, you will want the 12 inch assemblies # AKEBRK-7-SA. For mounting hardware you will need # 7-5, # 38N, and # 38LW.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media







Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Brake Assemblies, Hubs, and Bearing Kit for a Dexter 3,500 EZ Lube Axle
- Q&A: Can Brakes Be Added To An Enclosed Trailer With A 3,500lb Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide

