Electric Drum Brake Assemblies for 3500-lb Axle with 5-on-4-1/2 Hubs

Updated 02/21/2017 | Published 02/19/2017

Products Featured in This Question

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs

(374)

$51.55

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2

(1092)

$143.43

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs

(368)

$66.56

Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole

(1)

$11.32

Question:

do you have complete electric brake kits for 3500 lb axles with 5 on 4.5.

asked by: Kenny H

Expert Reply:

We do offer electric drum brake assemblies for 3500-lb axles that you can see on the linked page. All of these are the 10 x 2-1/4-inch size that mount to a 4-bolt brake flange like # DM60124. Be sure to select both left- and right-hand brake assemblies, such as # AKEBRK-35L-SA and # AKEBRK-35R-SA.

If you also need hub/drums assemblies in the 5-on-4-1/2-inch wheel bolt pattern be sure to check your current hubs' bearings. New hubs must use the same inner and outer bearings in order to fit your spindles. If your current hubs use inner bearing L68149 and outer bearing L44649 then you could use hub/drum # 84546UC3 which includes bearings, races, seal, grease cap, wheel bolts and lug nuts.

If you are looking to add brakes to an axle without them you can refer to the linked article for guidance on the items required.

expert reply by: Adam R