Specifications for Ball Mount # 3594 Included with Trailer Hitch # 60872 for a 2008 Hyundai Elantra
Updated 01/11/2011 | Published 01/09/2011
Products Featured in This Question
Question:
What are the dimensions for the included drawbar for part #60872
asked by: Scott
Expert Reply:
The ball mount that comes with the Hidden Hitch Trailer Hitch, # 60872 (no longer available), is Sportframe Drawbar, # 3594. This Class I ball mount is designed for a 1-1/4 inch receiver. It uses a ball with a 3/4 inch diameter shank. It is 10 inches long from the center of the hitch pin hole to the center of the ball hole. It will provide a 4 inch rise from the top of the trailer hitch receiver tube. This ball mount should only be used in the rise position. It is rated for up to 200 pounds tongue weight and 2,000 pounds gross trailer weight.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: Will Tow Loop on 2010 Hyundai Elantra Interfere w/ Trailer Hitch Installation
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2011 Hyundai Sonata
- Video: Install: Draw-Tite Sportframe Trailer Hitch Receiver on a 2008 Hyundai Elantra
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Q&A: How to Transport 65 Pound Scooter on 2008 Hyundai Elantra
- Q&A: What Is Needed To Tow With 2009 Hyundai Accent
- Q&A: Which Vehicles Does Draw-Tite Sportframe Trailer Hitch Receiver 24795 Fit
- Video: Draw-Tite Drawbar for 1-1/4" Hitches Feature Review
- Video: In-Depth Review of the Draw-Tite Drawbar for 1-1/4" Hitches
- Shop: Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
- Shop: Curt Class I Ball Mount for Vertical Hitch Receiver
- Video: Draw Tite Drawbar for 1-1/4" Hitch Feature Review
- Q&A: Hitch Recommendation for a 2007 Hyundai Elantra Sedan
- Video: Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2009 Hyundai Sonata
- Video: How to Install: Curt Trailer Hitch Receiver on your 2012 Hyundai Elantra
- Search Results: 1 7/8 inch ball
- Search Results: pigtail
- Q&A: Trailer Hitch for a 2010 Hyundai Elantra Sedan
- Q&A: Trailer Hitch Recommendation for 2008 Hyundai Accent for Ground Clearance
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class