Hitch Mounted Tow Ring with At Least 4 Inches From Center of Hitch Pin Hole to Closest Point of Ring  

Judging by our install pictures it looks like the Draw-Tite part #75690 looks to hang the lowest of all of the hitches we carry that are confirmed to fit your 2006 Honda CR-V. It's not a huge difference, but if you check out the picture I…

The hoops of the Erickson tow strap #EM59796 you referred to are compatible with the MaxxTow Tow Strap Loop, part #MT70029. Keep in mind, the tow strap has a 15,000 lb capacity, but a safe working load limit (WLL) of 7,500 lbs, which means you…

The best option to use a trailer hitch for vehicle recovery is with a hitch mounted tow loop, I recommend the MaxxTow Tow Strap Loop part #MT70029. This will allow the strap to shift freely inside the loop without issue.

I checked with Curt and receiver mount tow hook, #D-325, is limited by the gross trailer weight and tongue weight capacities of the trailer hitch it is being used with. It does not have a capacity of its own. So if the hitch is rated for 5,000 pounds…

There can be quite a lot of variances on the location of an exhaust system on a vehicle when leaving the factory and sometimes it can get in the way when trying to install an aftermarket trailer hitch receiver, like the Draw-Tite #75690 on your 2004…

The Curt Trailer Hitch Receiver part #13535 has 8-1/2" from the center of the hitch pin hole to outside edge of the spare tire when we installed the hitch on a 2006 Honda CR-V is 8 and 1/2". The Draw-Tite hitch from the center of the hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…