Replacement Air Cylinder for Roadmaster BrakeMaster Braking System

Question

Question:

Can I just buy the replacement ram with air fittings and pedal attachment?

asked by: Todd J

0

Expert Reply:

Yes, the repalcement air cylinder for RoadMaster Brakemaster (parts # RM-9060, # RM-9100, and # RM-9160) is # RM-9100-50. This includes the cylinder, pedal clamp assembly, air tube and floor plate.

expert reply by: Charles S

0

Answer 1

If by pressure switch you mean just the break away switch for your Roadmaster BakeMaster 9000 then you can use part #RM-650898. For a complete BrakeAway Kit including the switch and air cylinder use part #RM-8600. If you refer to the Pressure Reducer…

view full answer...

Answer 2

In order to reuse the air cylinder from the Roadmaster BrakeMaster 9000 Braking System you are going to need the RoadMaster Second Vehicle Kit with BreakAway for BrakeMaster Systems part #RM-98160, the Replacement Mounting Post for RoadMaster Second…

view full answer...

Answer 3

It sounds to me like you might have an issue with the connection of the ICX transmitter and the brake signal from the towed vehicle. You're getting the power to the ICX transmitter to activate the Even Brake #RM-9400 but not the signal from the…

view full answer...

Answer 4

Typically if the Roadmaster Even Brake Portable Supplemental Braking System #RM-9400 is having a leakage issue it's either the Air Cylinder #RM-452109-10 or the exhaust valve #RM-450601-50, with the exhaust valve usually being the number one…

view full answer...

Answer 5

Since your compressor is running non-stop on your Roadmaster Even Brake Portable Supplemental Braking System - Proportional Item #RM-9400 you have a leak somewhere and that is definitely able to kill your battery that quickly. You'll need to find…

view full answer...

Answer 6

I spoke with my contact over at Roadmaster and have some things that you can check. When the Even Brake #RM-9400 pushes on the brake pedal 3 times what it is doing is making sure that it is receiving a brake signal from the cold side of the brake…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Steve! I checked the flat towing set up and required parts for your 2014 Honda CR-V and you don't need a charge line like item #RM-156-25 because you don't disconnect your battery. Here are the rest of the parts you'll need to flat…

view full answer...

Answer 10

In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…

view full answer...

Answer 11

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 12

For your 2014 Honda CR-V, using the Blue Ox Patriot Portable Braking System #BLU37TR, you're going to need to add the: -12 Volt Outlet Kit, 20 amps #RM-9332 to be able to properly power and operate your system. Additionally, if you are interested…

view full answer...

Replacement Air Cylinder for Roadmaster BrakeMaster Braking System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching