Replacement Lid for 14 x 14 Ventline Trailer Roof Vent Model AS13M-V101

Question

Question:

Roof Vent Covers are destroyed. Opening is 14 x 14. Info on old cover is: VENT LINE / AS13M-V101. Second line on cover is : ANS Z26.1DOT 733. What cover do I need to replace these?

asked by: John M

0

Expert Reply:

We offer 14 x 14-inch trailer roof vent covers in many colors and styles. Based on your Ventline part number AS13M-V101 you can use either white lid # BV0554-01 or smoke lid # BV0554-03. Both feature a continuous type metal hinge, which is shown in the linked image. So long as this is your hinge type either replacement lid will work fine for you.

expert reply by: Adam R

0

click to enlarge

Mike B.

7/31/2020

Hi, I have a Nexhaul trailer and need a new roof vent dome which has cracked and vanished. I think it is 14"x14" and has a hand crank & looks like a ventline. I also want to put a Maxair over the new dome to allow air all of the time. Would it be worth putting a metal dome replacement as I don't want to keep replacing the plastic ones? Thanks,

Chris R.

8/10/2020

As long as the hinge-style still matches, using a metal lid replacement like # BV0534-00 is a really good idea. It will definitely offer a more durable unit that shouldn't require a new replacement every off-season.

Answer 1

I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well…

view full answer...

Answer 2

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

view full answer...

Answer 7

Hey Ray, thanks for reaching out. Yes we do have a good option for replacing your Dometic Duo-Therm 57915.531. With yours being an older unit, there is not a direct rooftop swap that keeps your existing controls. The correct path is replacing the…

view full answer...

Answer 8

Hey, Bill! I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part #2637R would be a comparable light. We don't have…

view full answer...

Answer 9

Most slides have EPDM rubber roofs but because EPDM is rubber it requires treatment each year to keep it soft and prevent shrinkage. You could replace it with TPO which is another synthetic rubber that will last longer than the EPDM. The smallest…

view full answer...

Answer 10

Hey Margaret! Congrats on the truck, those are super nice! Little too much for my blood though haha. In order to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1020 on your 2026 GMC…

view full answer...

Answer 11

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 12

Hey Dustin, the replacement lid you ordered a few years ago was the part #BVD0449-A01. I know it sucks yours fell apart but these aren't really designed to withstand a hail storm so I am not shocked yours broke apart. Would you prefer metal lid…

view full answer...

Replacement Lid for 14 x 14 Ventline Trailer Roof Vent Model AS13M-V101

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching