Amperage Rating for the Deka 2 Gauge Professional Service Booster Cables # DW00161

Question

Question:

How many amps are these cables rated?

asked by: JOHN H

0

Expert Reply:

The Deka 2 Gauge Professional Service Booster Cables # DW00161 is 2 gauge copper wire that is 24 feet in length so the amperage rating is 200 amps.

expert reply by: Jameson C

0

Answer 1

We do have a number of options for heavy-duty booster cables, and you can make the choice about what you need based on the length you need, as well as if you want the 1-gauge wire or 2-gauge wire. Your options are: - 1-Gauge Wire, 30 Feet Long:…

view full answer...

Answer 2

The Deka 2 Gauge Professional Service Booster Cables - 24' Long #DW00161 uses 100 percent copper conductors and not CCA (copper clad aluminum). The clamps are made of chrome-plated steel so they will be more resistant to corrosion and still offer…

view full answer...

Answer 3

The Deka 2 Gauge Professional Service Booster Cables, #DW00161, can be used to power your hitch mounted winch, but it wasn't really designed for that use and I think there is a better option. I recommend the easy disconnect system #BDW20133, that…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 6

Hey Gary! The Titan Chain Alloy Snow Tire Chains item #TC2335 you were looking at are exactly what I would recommend for your F-350 with 275/65-20 tires. They have square links which are great for breaking up ice and grabbing traction in the snow.…

view full answer...

Answer 7

Hi Victor! The Bulldog Winch Booster Cable Set - Clamp to Clamp - 2 Gauge - 20' Long #BDW20233 uses double-extruded, copper-clad aluminum wire, so I guess the answer to your questions is, yes. The clamps are 100% brass though. With that said, if…

view full answer...

Answer 8

Hey Charles, The Brophy #BH20 has a 13-1/4" from center of hitch pin hole to center of ball hole, which is a bit more than the B&W Tow & Stow ballmounts have so the closest option is going to be the B&W Tow & Stow 2-Ball Mount…

view full answer...

Answer 9

The B&W Tow & Stow 3-Ball Mount #BWTS20048B that you referenced features a maximum drop of (or rise) of 4-1/2 inches. This measurement is taken from the center of the hitch pin hole on the shank down to the ball platform when it's…

view full answer...

Answer 10

You can lock your B&W Adjustable Ball Mount #BWTS20040B using their matching 2-1/2-inch hitch lock #C23025. This pin lock also fits their chrome ball mount #BWTS20040C.

view full answer...

Answer 11

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount. I have attached a short…

view full answer...

Answer 12

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20048B and measured a distance of right at 5-1/2 inches from the bottom of the shank to the lowest point of the vertical adjustment post. I have attached an…

view full answer...

Amperage Rating for the Deka 2 Gauge Professional Service Booster Cables # DW00161

Product Page this Question was Asked From

Continue Researching