Additional Brake Control Wiring Adapter for Swapping Controller from 2005 Expedition to 2005 F250

Updated 10/30/2010 | Published 10/29/2010

Products Featured in This Question

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford

(113)

$13.59

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury

(1798)

$19.78

Question:

We have both a 2005 F250 and a 2005 Expedition. They require different harness plugs. How much would it cost to get this brake controler and both wires/plugs so we could swap the controller back and forth? Would also need part numbers for ordering. Thank you!

asked by: Rich B

Expert Reply:

The F-250 uses wiring adapter # 3065-P, and the Expedition uses adapter # 3035-P. You can purchase the Prodigy P2 brake controller # 90885 and the adapters you will need separately.

To see the current pricing for the wiring adapter, use the provided link.

Since you are wanting to swap the controller back and forth between the two vehicles, using an additional mounting pocket, part # 7686 would be a good idea. All you will have to do is unplug the unit, unclip the controller from the pocket, and move the controller to the other vehicle.

I will provide links to the adapter harness for the Expedition and the replacement mounting pocket. I will also provide a link to the install instructions for the Prodigy P2.

expert reply by: Mike L