Replacement Velcro Strip for Access Tonneau Cover

Question

Question:

My strips are one and a quarter wide. Are you able to easily cut them down to my width and still hold in the track?

asked by: Dennis M

0

Expert Reply:

The Replacement Velcro Strip for Access Tonneau Covers # A60270 measures 17-feet long x 1-inch wide. It is intended specifically for their Tonnosport and Vanish tonneau covers.

We also offer a 1-1/2-inch wide version, part # A30474, which fits their Original, Lorado, and Lo Rider tonneau covers.

I recommend using the specific kit for your particular tonneau cover to ensure a good fit. We also offer similar products for the other tonneau cover brands we carry.

expert reply by: Adam R

0

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 3

Thanks for reaching out Kaiya, happy to help! For the 1998 Chevy C1500 Stepside, drilling is not required to install the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-FMC2576. On Stepside models, the cover uses the factory…

view full answer...

Answer 4

I have an answer for you. Unfortunately, we do not carry Gator-brand tonneau covers, so we will not be able to confirm for sure if our replacement replacement Access Velcro strips will fit your tonneau. However, judging by your attached picture and…

view full answer...

Answer 5

Hi Randy; we don't have any replacement parts for an Ionic tonneau cover but you may be able to use the Replacement Velcro Strip for Access TonnoSport and Vanish Covers #A60270. This is the hook side, 1" wide by 17' long. However, this…

view full answer...

Answer 6

Hey Dan, thanks for the information! We've actually ran into this exact situation before with the Chevy tonneau covers. The Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds item #TX1117876 can be used…

view full answer...

Answer 7

I'm going to need you to measure the width of the Velcro strip of your Access tonneau cover. If the width his 1-1/2 inch you'd need the part #A30474, if it's 1 inch you'd want the part #A60270, or 1-1/4 inch part #A20790.

view full answer...

Answer 8

To install a brake controller on your 2017 Chevrolet Silverado 1500 LT 4x4, you will just need the vehicle specific plug-in adapter. These adapters are usually brand specific. For example, if you go with the Tekonsha Prodigy P3 brake controller,…

view full answer...

Answer 9

The correct replacement Velcro for the Access Vanish tonneau covers is part #A60270.

view full answer...

Answer 10

To find replacement Velcro for your tonneau cover I would have to know what kind of tonneau cover you have. For example, the #A60270 you looked at is designed to fit Access TonnoSport and Vanish covers.

view full answer...

Answer 11

Your 2019 Chevy Silverado 1500 4x4 is flat towable as long as it has a two-speed transfer case that has a neutral and a 4-low setting. For a base plate kit you'd then want the part #RM-523199-5 to provide the attachment point for a tow bar to…

view full answer...

Replacement Velcro Strip for Access Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching