Can I Mount this Backup Mirror K-Source, #KSC088, to the Body of my 2009 Toyota 4Runner

Question

Question:

I have a 2009 Toyota 4Runner and the rear window opens all the way. I need to find out if I can mount it to the body of my 4runner just above the rear window. Thanks

asked by: Mike D

0

Expert Reply:

As long as you have a relatively flat surface to mount this mirror to you should have no problem installing this K-Source Backup Mirror on your 2009 Toyota 4runner.

This KSC088 mirror mounts using an adhesive, so you will not have to use any tools or make any permanent modifications to mount this on your 4Runner. The dimensions of this mirror are 12-1/2 inches long x 7-1/2 inches wide.

expert reply by: Jameson C

0

Answer 1

I attached a picture that has all of the mounting pad dimensions of the K-Source Backup Mirror #KSC088. Basically it's 2-7/8 inches wide and 4-3/4 inches long.

view full answer...

Answer 2

Your current back up mirror similar to the K-Source #KSC088 that you referenced is most likely stuck on with an adhesive. What you can do is run floss or fishing line under the adhesive to separate it from the glass.

view full answer...

Answer 3

The K-Source Backup Mirror #KSC088 is a stick-on mirror that you can put pretty much anywhere on the vehicle to gain more visibility. If you like a backup camera for your vehicle so that you can see everything behind you with ease then let me know…

view full answer...

Answer 4

The #KSC088 K-Source backup mirror would work for aligning your fifth-wheel hitch and king pin, but this mirror will only allow you to see a field up to 6' behind the mirror. If your truck has a long bed, you would not be able to see the king pin…

view full answer...

Answer 5

The K-Source Backup Mirror part #KSC088 is not designed for multiple uses. If the mirror has already been attached and secured, it cannot be moved to another location. The double sided adhesive tape used to attach the mirror is not rated for this…

view full answer...

Answer 6

The K-Source Backup Mirror - Stick On, part #KSC088, is adjustable and has a fish eye lens to give you the optimum viewing of whats behind you. The viewing range on this #KSC088 is up to six feet behind where you mount the mirror on your vehicle, and…

view full answer...

Answer 7

CIPA doesn't just come out and say what the material is so I ran out to the warehouse and checked out the Hot Spot Mirror 4" x 5-1/2" Convex Stick On #49402. According to the back label of the packaging the mirror is made of glass and…

view full answer...

Answer 8

To get your Thule T2 Pro XTR Bike Rack for 2 Bikes 1-1/4" Hitches item #TH23JV to fit in a 2" hitch receiver you will want to use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item #HT02. This is a reducer sleeve that…

view full answer...

Answer 9

Starting with the hitch adapter for the 2 inch hitch receiver on your vehicle, I actually recommend going with the Brophy Hitch Reducer #HT02 instead of the Tow Ready #80300 that you referenced. The reason for this is that the Tow Ready adapter, when…

view full answer...

Answer 10

I would be happy to recommend a 2" to 1-1/4" extended hitch adapter for you. Since your 2015 Jeep Wrangler's spare tire gets in the way of bike racks I recommend the etrailer Hitch Adapter #e38YR which will allow the 1-1/4" Yakima…

view full answer...

Can I Mount this Backup Mirror K-Source, #KSC088, to the Body of my 2009 Toyota 4Runner

Product Page this Question was Asked From

Continue Researching