Boat Trailer Wobble Roller with 4-1/4 Inch Diameter, 3 Inch Width that Fits a 3/4 Inch Shaft
Updated 08/04/2016 | Published 08/03/2016
Products Featured in This Question
Question:
I have several rollers needing replacement but cant locate the size. They are ribbed, 41/4 outside diameter, 3/4 inside diameter, 3 wide with a 1 inch inside width. Do you have anything that matches this?
asked by: Dave C
Expert Reply:
Wobble roller # DL21564 is a close match to what you need. It has a 4-1/4 inch diameter and it is 3 inches wide. But it fits on a 7/8 inch diameter shaft and the hub center is 1-1/2 inches wide.
Wobble roller # YR343R-6P could work. It is 4-3/8 inches diameter and 3 inches wide. It fits a 3/4 inch shaft but the hub center is 1-1/2 inches wide. But if the overall width is 3 inches then the hub center width should not matter.
Product Page this Question was Asked From
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 3/4" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Plastic
- Fits 3/4 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 3/4" Shaft
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 5/8" Shaft
- Q&A: Replacement Rollers For Wobble Rollers To Eliminate Marks and Gauging In The Boat Hull
- Video: A Closer Look at the Yates Ribbed Wobble Roller
- Q&A: Will Adding Leaf Springs with More Leaves Raise the Trailer
- Q&A: Replacement Wobble Rollers 5 Diameter, 3 Wide For a 3/4 Shaft
- Q&A: Comparing PVC, TPR, and Polyurethane Boat Rollers
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: Availability Of Non-Marking Wobble Roller To Replace Yates Ribbed Wobble Roller YR343R-6P
- Q&A: Does Yates Wobble Roller part # YR440R have a Metal Bushing
- Article: Cargo Tie-Down Methods