3,500 lbs. Axle with Hydraulic Drum Brakes Kit
Published 08/02/2016
Products Featured in This Question
Question:
Hi there do you have an axle e43SR with hydraulic brakes? I am looking for 2 assemblies.
asked by: Jeff
Expert Reply:
I have a solution for you but unfortunately we do not carry any axles that come with hydraulic brakes. What you will need to do is buy the parts separately, but I have all the parts you will need.
First, for an axle, you will need the Dexter Axle Beam with EZ Lube Spindles # T3584F-EZ-8974. This axle is 89" long with a weight capacity of 3,500 lbs. which is the same as the # e43SR Axle you were looking at.
For your Hydraulic Trailer Brake Assemblies you will want the etrailer Left Hand Assembly part # AKUBRK-35L which is rated for 3,500 lbs. For the Right Hand Assembly, you will need part # AKUBRK-35R. The hub and drum assembly that will fit on your brake assemblies is the etrailer Hub and Drum Assembly for 3,500 lbs. Axles and 5 on 4-1/2" Wheels # AKHD-545-35-EZ-K. You will need two hubs and drums for two brake assemblies.
If you do not already have a surge actuator and brake line kit, I have some recommendations for you.
For a Surge Actuator, I recommend the Dexter Zinc-Plated Brake Actuator # 099-175-00. This actuator locks in place on hitch balls measuring 2" and is designed for drum brake applications. The weight capacity for this actuator is 7,500 lbs.
If you have a single axle with brakes, the Titan Hydraulic Brake Lines and Fittings # T4829900 is what you need. If you have tandem axles with brakes, the Titan Hydraulic Brake Lines and Fittings for Tandem-Axles # T4830000 will be the right fit.
I attached and installation video for the Dexter Trailer Axle you may want to check out. I also attached a review video of the Hydraulic Brake Assemblies and a help article on how to install Hydraulic Drum Brakes to a trailer for your convenience.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Suspension Enhancement
- Shop: Exhaust
- Shop: MagnaFlow MF Series Cat-Back Exhaust System - Stainless Steel - Gas
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Search Results: brake master cylinder
- Search Results: boat trailer brake lines
- Search Results: drum
- Search Results: grease caps
- Search Results: brake actuator
- Search Results: brake lines
- Search Results: brakes
- Q&A: Galvanized Surge Brake Actuator and Brake Assembly for a 3,500 lb Axle
- Q&A: How To Determine Axle Diameter And Size
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Video: All You Need to Know About the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: Kodiak Hydraulic Brake Line Kit Spec Review
- Video: The Low-Down on the Demco Hydraulic Brake Actuator w/ Drop
- Video: Titan Trailer Brakes T4829900 Review
- Video: In-Depth Review of the Dexter Zinc-Plated Brake Actuator
- Video: Demco Hydraulic Brake Actuator w Drop and Electric Lockout Spec Review
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 12.5K
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Shock Absorbing Pin Box For 2022 Grand Design 150 Series
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
on Trailer Axles
