Replacement Straight Equalizer for Existing 6-1/2 Inch Long Straight Equalizer
Published 06/07/2016 >
Question:
I Have a straight equalizer that needs to be replaced. It is 6.5 inch center to center on outside holes. Can I substitute your 5.5inch straight equalizer and use a slightly longer shackle strap?
asked by: John F
Expert Reply:
To replace your existing 6-1/2 inch long straight equalizer you can use the 5-1/2 Inch Long Straight Equalizer for 1-3/4 Inch Double-Eye Springs # TREQR2 with longer shackle straps on your trailer. If you replace your 6-1/2 inch equalizer on one side, you will want to use the same set-up on the other side of the trailer as well.
The # TREQR2 equalizer measures 5-1/2 inches from the center of one bolt hole to the center of the bolt hole on the other end. The equalizer is 1-1/2 inches tall and the bolt hole diameters are all 9/16 inches.
We offer a variety of different shackle strap lengths. Since you are using an equalizer that is shorter than your existing equalizer, you are correct that you will want shackle straps that are slightly longer than the existing shackle straps on your trailer. All of our shackle straps can be found at the attached link for you.
Product Page this Question was Asked From
Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 5-1/2 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake magnets
- Search Results: trailer equalizer
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: Breaking Down the Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Video: Feature Review Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Shop: Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Video: Curved Equalizer for 1-3/4" Wide Double-Eye Springs Review
- Video: Curved Equalizer for 1-3/4" Wide Double-Eye Springs Spec Review
- Video: All You Need to Know About the Curved Equalizer for 1-3/4" Wide Double-Eye Springs
- Shop: Truck Bed Camera
- Shop: Trailer Hitch
- Q&A: Diameter of Trailer Axle Beam with Easy Grease Spindles e83GR
- Q&A: Replacement 3,500 lb Axle With 4" Drop
- Q&A: Replacement 3,500LB Spindle/Axle Options For Boat Trailer With Obsolete Tapered Spindle 5 on 4-1/2
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Is the Dexter Trailer Axle Beam - 4" Drop - 3.5K - 95" Long Offered with Different Spring Center
- Q&A: Recommended 3500 LBS 95" Axle and Replacement Spring Seats for a 78" Spring Center
- Q&A: How to Figure Out Which Trailer Axle Will Fit My Trailer
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Search Results: trailer suspension parts
- Search Results: 2625 leaf spring
- Search Results: mr27zr
- Search Results: morryde cre3000
- Search Results: cre 3000
- Video: Dexter E-Z Flex Equalizer Kit Review
- Article: Double-Eye Trailer Suspension System Review

