Replacement Part Availability for Stromberg Carlson Landing Gear

Question

Question:

I am in need of Stromberg Carlson Landing gear replacement parts. what do you guys offer?

asked by: Dennis

0

Expert Reply:

We have quite a few different Stromberg Carlson replacement parts available. You didn't say which you needed. But we have the gear box part # LG-179015, the motor part # LG-142178, follow leg part # LG-179014, lead leg # LG-179013.

Replacement switch is part # LG-145236 and foot plate part # LG-119225.

We also have repair kits. Part # LG-146059 for the lead leg and part # LG-146060 for the follow leg.

That should cover everything, but if you need something more specific let me know!

expert reply by: Jameson C

0

Answer 1

Thanks for the pictures! Based on the part number of your motor it appears you have Venture landing gear. As such you will likely need follow leg rebuild kit #LC146060 or lead leg rebuild kit #LC146059 to fix your landing gear. Landing gear legs are…

view full answer...

Answer 2

Thanks for the picture, Brad. If the leg is in good shape otherwise, I'd recommend just going with a rebuild kit opposed to a whole leg. You can use the Lead Jack Repair Kit for Stromberg Carlson Landing Gear #LG-146059 for the lead legs and…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Answer 5

Hi James; the better option would be the Bulldog #BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear #LG-217884 to the Bulldog which will give it the same functionality as the #LG-4 while saving you…

view full answer...

Answer 6

Hi Shaun, I can definitely help with that. From what we typically see on the 2020 Forest River Wolfpack 365PACK16, the most common landing gear setup is the Lippert/Venture style system with 33-1/2 inch outer tubes and 15-1/2 inch inside-to-inside…

view full answer...

Answer 7

For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set #LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of…

view full answer...

Answer 8

For your 29-30 inches measurement, please look at the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2", #LG-179013 and its counter part the Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2",…

view full answer...

Answer 9

Hey Wayland, the motor kit you need to use with the part #RVLG-8000 is the part #LG-142178 and you'd be able to turn it into a powered landing gear set.

view full answer...

Answer 10

The weld stops on the legs of Stromberg-Carlson landing gear set #LG-1 are indeed 17-1/2 inches measured from the top of the top one to the bottom of the bottom one. If you look at the diagram I have included you will see that they have measured from…

view full answer...

Replacement Part Availability for Stromberg Carlson Landing Gear

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching