Can Chains on Strait-Line Weight Distribution System Hang at an Angle

Updated 03/29/2016 | Published 03/27/2016

Products Featured in This Question

Chain Hangers for Reese Weight Distribution Systems - Bolt On

(69)

$97.42

Question:

Does the chain connected to the dual cam have to hang vertical ? Can the chain be on an angle forward or backward ? If so to what degree ?

asked by: Mitch

Expert Reply:

You will need to have the chains on a Strait-Line weight distribution system straight up and down. There isn't a range of angles at which the chains can hang but I would not place the brackets off by more than 1/4 inch of where they are supposed to be. Otherwise the system will not be effective.

If there is something on the trailer frame prohibiting proper placement of the brackets then I recommend using chain hangers # RP58305 which bolt to the sides of the frame.

expert reply by: Michael H