Are Bushings Included with Redline 6-Leaf Double-Eye Spring e64SR

Updated 03/23/2016 | Published 03/21/2016

Products Featured in This Question

6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long

(2044)

$73.50

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long

(748)

$9.98

Shackle Bolt with Locknut for Double-Eye Springs - 3" Long

(924)

$8.31

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear

(131)

$46.93

U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts

(1995)

$66.64

Question:

Rebuilding my trailer, just have a quick question that I have everything correct: 1. e64SR - 6 Leaf double-eye spring 7,000lb 2. APS1 - Hanger Kit 3. TRBU11566 - Nylon Bushing Is that size bushing the correct size for the leaf springs? And, will i need 4 of them? I am assuming so. Thanks!

asked by: Samuel A

Expert Reply:

With the Redline 6-Leaf Double-Eye Spring # e64SR for 7,000-lb Trailer Axles the correct nylon bushings to use are already included in with the spring. If you need shackle bolts to install the springs you can use either dry bolt # 166081 or wet (greaseable) bolt # 126B2.

For a single axle trailer you can use hanger kit # APS1. For a u-bolt kit to mount your 3-inch axle to your springs you can use part # APUBR-8.

expert reply by: Adam R