Timbren Axle-Less Suspension for 10,000 Pound Mobile Hydraulic Lift

Updated 03/21/2016 | Published 03/19/2016

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2

(589)

$171.96

Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2

(72)

$148.40

Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs

(202)

$62.04

Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs

(201)

$59.05

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs

(124)

$1286.93

Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 5 Bolt Flange - 5,200 lbs

(124)

$1470.81

Question:

We are a manufacturer of a mobile hydraulic lift and are designing a tow-behind model incorporating axle-less tandem wheels into our frame requiring a load capacity of about 10,000 pounds. Do you have components of that capacity?

asked by: Robert J

Helpful Expert Reply:

A tow-behind hydraulic lift is going to need to be stable so I recommend using a tandem axle set up just like you mentioned. That would equate to using 2 sets of Timbren Axle-Less systems rated for 5,200 pounds for a total capacity of 10,400 pounds.

We have a couple of options in this capacity: # ASR5200S01 has regular spindles; no rise or drop, and # ASR5200S04 has a 4 inch drop spindle meaning that it will lower the trailer by 4 inches.

For a hub and drum assembly that will fit these systems I recommend # 8-201-5UC3-EZ and if you don't want to have brakes then the idler hub that will fit is # 8-213-5UC1-EZ. Both have the 6 on 5-1/2 bolt pattern.

If you choose to have brakes then you can use # AKEBRK-6R for the light and # AKEBRK-6L for the left.