Replacement Leaf Spring For 1998 Boat Trailer Carrying 18-Ft Bass Boat

Updated 03/01/2016 | Published 02/28/2016

Question:

Have a 98 model boat trailer for a 18 ft bass boat single axle single leaf it is 27 inches from the center of the eyes do you make one to replace this

asked by: David M

Expert Reply:

The best fit when replacing leaf springs on a trailer is to know what the trailer and axle capacity is. There may be a plate or sticker that has that information listed.

We offer one single leaf spring, part # e46SR, and it is designed for 6,000 axles. It has a measurement of 25-1/4 inches eye center-to-center.

If you are measuring the spring after it has been taken off the trailer it may have flattened a bit over time. As far as the leaves in the leaf spring, we may have one that would be a good match for your trailer but may have more than one leaf.

We do have a 4-leaf spring for 3,500-lb axles. it is part # SP-210275, and has a measurement of 27 inches eye to eye. The eye diameter is 9/16 inch and the width of the spring is 1-3/4 inches.

expert reply by: Jeffrey L