Replacement Weather-Stripping for Ventline Ventadome V2094

Question

Question:

Is this weather seal available, I think our 10 yr old seal needs replacing. ventline ventadome V2094 weather seal ??

asked by: Ken

0

Expert Reply:

Good news, the replacement seal for your V2094 Ventadome vent is # BVD0455-01.

Another option would be to go with the Redline # WS1412 which is 1/4 inch thick by 1/2 inch wide by 45 feet long or the Redline # WS1434 which is 1/4 inch thick by 3/4 inches wide by 50 feet long.

I have linked the above products to this page for your convenience.

expert reply by: Jackie C

0

Answer 1

For a gasket you could use with a roof vent that uses the lid part #BV0554-01 you'd want the part #BVD0455-01.

view full answer...

Answer 2

Do you have an older V2094 vent? The part #BVD0449-A01 that you referenced fits V2094 vents post-2008 while the part #BV0554-01 is for V2094 vents pre-2008. If you have an older V2094 vent then this is the vent cover you are needing. This has a…

view full answer...

Answer 3

Camco part #CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand…

view full answer...

Answer 4

Thanks for the picture of your RV roof vent lid that you need a replacement for. Seeing that makes it easy to know what you'd need with the part #BVD0449-A03.

view full answer...

Answer 5

While the hinge style of the Replacement Lid for Ventline #BBC-0530-04 and the #CAM40148 is basically the same the corners of the lids are different. One is square and the other is round. You'd need to check out what your current lid has and go…

view full answer...

Answer 6

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 7

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Answer 8

You did indeed see a video showing how to replace the vent lid #BVD0449-A01. I have linked that video for you here as well. IT was one that I made a while back and that is probably where you saw it.

view full answer...

Answer 9

The best way to determine if we have a replacement cover that will fit your trailer vent is to locate the manufacturer name or model number of your roof vent. If you are unable to locate this information you will want to measure the vent opening as…

view full answer...

Answer 10

Hello Dave, Great question, and I definitely understand wanting to get the right length so the compartment closes snug without having to bend or modify anything. At this time, we don’t have a 2-1/2" flat cam bar listed separately on etrailer for…

view full answer...

Answer 11

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

view full answer...

Answer 12

Welcome back Chris. The original MaxxFan 5100k fans couldn't handle the extra voltage from Lithium batteries and the boards would burn out. A green light would come on and beep after the fan runs for only a few seconds, which sounds like exactly…

view full answer...

Replacement Weather-Stripping for Ventline Ventadome V2094

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching