Recommended Compatible Hubs for Use with Timbren Off-Road Suspension System ASR35HDS02
Published 01/21/2016
Products Featured in This Question
Question:
considering the Timbren axle-less system as a retro fit to the existing straight axle on the extreme offroad trailer we have built. building it in and all other issues onn the FAQ section are no problem. my concern is that I can get a hub bolt pattern to match the Tahoe that tows it 6x 5.5inch a deal breaker.
asked by: John B
Expert Reply:
In order to use 6-on-5-1/2-inch bolt pattern hubs on a Timbren axle-less suspension system those hubs will have to use the same bearing set as the hubs intended for that system. In the Timbren system # ASR35HDS02, for example, which has 4-inches of lift and is rated for 3500-lbs and off-road tires, the bearing set is inner bearing # 25580 and outer bearing # 15123.
We do offer idler hubs and hub/drums in the 6-on-5-1/2-inch bolt pattern that you can see by clicking on the link provided. For example, for a galvanized idler hub you can use part # 8-213-51UC1-EZ. For a hub/drum use part # 8-201-9UC3-EZ or for galvanized part # 8-201-51UC3-EZ.
Note that each available hub can work with a differing range of wheel sizes so keep that in mind as you select. This is noted on the main page for each item.
If you'll need wheel bearing grease and a grease gun we offer the LubriMatic Mini Grease Gun and grease # 30-800 and # L54FR.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Video: Bearing Buddy Bearing Protectors Feature Review
- Search Results: bearing buddy 244
- Search Results: trailer bearings races seals caps
- Search Results: spindle castle nut
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Q&A: Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Shop: Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Q&A: Does Zerk Fitting On EZ Lube Spindle Need To Be Removed When Using Bearing Buddy?
- Q&A: What Spindle Fits the Trailer Hub # AKIHUB-655-6-K
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Q&A: Availability of 6k Trailer Hub with 6 Lug Bolt Pattern Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)