Does Torx Head Screwdriver Bit Work With Torx Floor Screws # TF01225
Updated 05/10/2025 | Published 12/15/2015
Products Featured in This Question
Question:
Will your: Torx Head Screwdriver Bit Code: TX430-1 Fit onto a: 2-1/4inch Long Torx Floor Screws, 40/Pkg Code: TF01225 Do you have the 7/32 Drill Bit - - required 7/32inch pilot hole for the Long Torx Floor Screws
asked by: Andy
0
Product Page this Question was Asked From
Continue Researching
- Q&A: Recommended Spare Tire Carrier for Aluminum Trailer Frame
- Q&A: Recommendation For Screws To Attach Pressure Treated Decking To a Flat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Axle With 58" Spring Center And 1-1/16" Spindles
- Q&A: Recommendations For Replacing A 1-1/2 Inch Grease Cap?
- Q&A: Which Torx Trailer Deck Screws for 2 x 6 Floor Boards
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can I use the Redline Torx Trailer Floor & Wall Liner Screw for ACQ Treated Wood TFX150ACQ
- Q&A: How Many Screws to Should be Used for Re-Decking Trailer
- Article: Carrying on a Legacy: One Family’s Story of Grief, Growth, and a Global Pandemic
Ralph C.
4/29/2025
Jeffery To install these screws do you have to make a Pilot hole first? I the process of replacing my car trailer deck pressure treated wood?