Powered Landing Gear Recommendation for a 6,000 lb Gooseneck Trailer

Question

Question:

I need an electric motor operated unit that will lift my 6000lb. Goose Neck Horse trailer. Can you help me.

asked by: Darrell E

0

Expert Reply:

We have exactly what you would need. For a gooseneck trailer you would need a powered landing gear set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This dual motor set has 12,000 lbs of lifting capacity and would work very well on a 6,000 lb trailer.

This jack has 38 inches of lift as well. I attached a picture that shows the dimensions of the mounting brackets of the jack legs for you to check out too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, though to use your current brackets you need to do some measuring to ensure. So what you can do to make it easy is measure the distance between your hangers, and follow the dimensions in the photos below to see if yours match up. - If…

view full answer...

Answer 2

While I don't have any way of knowing off-hand, I can tell you how to determine the fit on your Forest River of the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs #UF17-943010. It's pretty easy, as all you have to do…

view full answer...

Answer 3

The Ultra-Fab Electric Landing Gear you referenced, part #UF17-943010 aren't coach specific, they should fit your 5th wheel if their capacity is sufficient and there's a place to mount them. Both legs combined offer a 12,000 lb capacity. The…

view full answer...

Answer 4

The Landing Gear Set part #RVLG-8HDL can be used as a manual system or a single motor electric system. The reason for this is because you can only use a motor with the lead leg and the above set has one lead leg and one follow leg. Therefore,…

view full answer...

Answer 5

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

view full answer...

Answer 6

When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle #RVLG-8HDL will work for you. The landing gears have a durable, black powder coated outer tube and has zinc-finished inner tubes that…

view full answer...

Answer 7

Ultra Fab uses a unique mounting bracket dimension that does not match the Lippert or Reese systems surprisingly. You could still uses the part #UF17-943010 but you'd have to have the brackets on your trailer moved to match the landing gear.…

view full answer...

Answer 8

The only difference between the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear #RVLG-8HDL that you mentioned, and the Landing Gear Set #RVLG-8000 is that #RVLG-8HDL comes with the handle, whereas if you were to go with…

view full answer...

Answer 9

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

view full answer...

Answer 10

If you are looking to replace your landing gear then I have a possible solution for you, we just don't carry any sets with the part VMC900R-304103 that you referenced. Our Landing Gear Set #RVLG-8HDL is rated for 8,000 lbs and has 20-1/2" of…

view full answer...

Answer 11

Thank you for providing that information. Based on that, I recommend the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010. These dual electric jacks are a universal fit so the mounting brackets will need to be welded to the frame of your 2019…

view full answer...

Answer 12

Without being able to check the individual components and determine if the slipping is occurring in legs, gear box or motor it is hard to say what one part will fix your issue on your 2020 Forest River Wolf Pack 335 Toy Hauler. My recommendation is…

view full answer...