Inner, Outer, and Drop Leg Measurements for Bulldog Square 8,000 Pound Trailer Jack
Question:
What are the dimensions of the tubes and there wall thickness? Does the tube with foot come off?
asked by: Harry
0
Expert Reply:
Bulldog Square Jack # BD180455 has 3 tubes. The outer tube is 3 inches square. The inner leg is approximately 2-1/2 inches square. The outer tube thickness is approximately 1/8 of an inch thick and the inner is between 1/16 and 1/8 inches thick.
The drop leg, which can be removed, is 2 inches square and the wall thickness is the same as the inner leg (between 1/16 and 1/8). The measurements are approximate because they vary ever so slightly due to manufacturing tolerances.
expert reply by: Michael H
0
Video/Article/FAQ this Question was Asked From
Article or VideoFeatured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- How Does the Bulldog 7.2K Square Jack Mount
- Replacement Handle Recommendation for Bulldog Sidewind Trailer Jack # BD180455
- Dimensions of Bulldog Square Jack with Footplate BD180455
- Replacement for Fulton Jack 70SP28F
- Replacement Jack for Load Max Trailer
- Replacement Handle for a 7,200 Pound Bulldog Square Jack
- Replacement Parts For 7,000 LB Sidewind Trailer Jack
- Replacement Lower Bushing And Washer For The Ram TJD-7000S Jack