Replacement Recommendation for Ventline EZ-Lift Vent

Question

Question:

I have a 2015 Heartland Elkridge E30 with the new Ventline EZ-Lift Vents that are smoke in color. I would like to replace one of my smoke colored vents with a white vent. This one looks correct, but I want to make sure this hinge will fit? The pictures look like it, but the smoke colored version of this same lid has a different hinge in the pictures. Can you confirm this PN BVE0108-00 has the exact same hinge as the picture of my hinge and the pictures on this page? Thanks,

asked by: Del

0

Expert Reply:

Good news, the Ventline Replacement White Dome # BVE0108-00 will fit your EZ-Lift Vent.

I looked at the smoke replacement dome you looked at, and you are correct they look slightly different, it appears the smoke one has reinforced edges on the end.

expert reply by: Jackie C

0

click to enlarge

Answer 1

The replacement dome for your E-Z Lift Ventadome Trailer Roof Vent is part #BVE0108-03. This is a smoke-colored polypropylene cover and is designed to fit your roof vent. If you want a white replacement cover for your vent, then you need part…

view full answer...

Answer 2

Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid. Please refer to the linked photo showing the different hinge styles…

view full answer...

Answer 3

Hey Heather, you would need the standard MaxxAir Vent Cover part #MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome as there isn't a specific one that fits the Ventadome. The MaxxAir is a universal design that will work…

view full answer...

Answer 4

I attached an install video that will help you replace the Ventadome style roof vent on your RV. In the video it's the Ventline cover part #BVD0449-A01 but this is the exact same design as the #BVE0108-00 you have.

view full answer...

Answer 5

I spoke with my contact at Ventline and she stated that if you have a newer EZ Lift Ventadome, the correct replacement lid will be part #BVE0108-03. This smoke color lid features a plastic hinge with four mounting points. You can compare the hinge…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Recommendation for Ventline EZ-Lift Vent

Product Page this Question was Asked From

Continue Researching