Zip Strap Replacement Recommendation for a Yakima Ridgeback 2 Bike Rack.

Question

Question:

I have lost the Zip Strips, safety strap and front wheel strap for our Yakima Ridgeback 2. I can find the zip strips on your web site but unsure if the variety of Yakima straps listed work for my ridgeback.

asked by: Rita O

0

Expert Reply:

I checked with Yakima and the correct replacement zip straps you need are the part # Y8890297 for your Yakima Ridgeback 2.

expert reply by: Jameson C

0

Answer 1

The Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles #Y8890297 have a width measurement of roughly 20mm and a thickness of roughly 3 mm. The #Y8890297 were used on Yakima bike racks manufactured before December 2015.

view full answer...

Answer 2

Since you got the FullSwing in 2016, and your cradle has a black release button (thank you for the photo by the way), unfortunately the 8890297 you got are incorrect. So what you need are the Replacement ZipStrip Straps for Yakima SuperCush Bike Rack…

view full answer...

Answer 3

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Zip Strap Replacement Recommendation for a Yakima Ridgeback 2 Bike Rack.

Continue Researching