Hole Spacing of Brackets Included in Fulton # F500286 Trailer Jack Mounting Hardware Kit

Question

Question:

I would like to find out what the dimensions of part kit F500286 is. More precisely, the distances between the holes on the bracket and the overall size of the bracket. Also, the diametre of the holes on the bracket. Thank you.

asked by: Andre

0

Expert Reply:

The brackets included in the Fulton # F500286 Replacement Jack Mounting Hardware measure 6-5/16 inches long by 1-5/16 inches long. The hole spacing between the closer holes is 1 inch, the spacing between the group of 4 holes and the further away hole is 2-5/16 inches. The hole diameter is .41 of an inch, just a bit larger than 7/16 of an inch.

I've provided a diagram showing these dimensions.

expert reply by: Mike L

0

click to enlarge

Answer 1

The bearing races on a trailer hub, like the Trailer Hub Assembly, part #8-258-5UC1, are removable, they are not built into the hub. I am including a link to a FAQ page on wheel bearings, races, and seals. Also, a link to a video of removing and…

view full answer...

Answer 2

Thanks for sending me your picture; it helped out a lot! Instead of new U-bolts, I would instead suggest the Fulton replacement mounting hardware #F500286. This will be able to accommodate different sized frames of trailers and the threads will be…

view full answer...

Answer 3

The Bulldog Round, Bolt-Thru Swivel Jack part #BD154102 can be used with the Bolt-On Mounting Kit part #F500349 and Mounting Hardware part #F500286 to attach to a trailer frame without welding.

view full answer...

Answer 4

You will be able to use the Bolt-On Mounting Kit #F500349 with the Mounting Hardware #F500286 to bolt on the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Hole Spacing of Brackets Included in Fulton # F500286 Trailer Jack Mounting Hardware Kit

Continue Researching