EZ Flex Suspension Equalizer Recommendation for a 2003 Keystone 244 Model

Published 09/24/2015

Question:

I have a spring length of 26. There are 33inch between 2 3/8 axles center to center. My Equalizers made in China measure 6 1/8c to c long, 4c to c from top bolt on diagonal to either bottom bolt, and approximately 2 1/2inch tall from top bolt to a perpendicular line drawn between the rt and left bottom bolts center to center. Will the EZ Flex Kit K71-652-00 replace this equalizer? How much will this lower the 5th wheel? What would the height of EZ Flex be from top hole to a perpendicular line between rt and left bottom holes c to c when EZ Flex is extended to 6 1/8inch long from bottom holes c to c? This unit is a 2003 model 244 Keystone Cougar 5th wheel GVWR 8240 lbs Pin wt app 1500 lbs

asked by: Frank H

Expert Reply:

The EZ Flex part # K71-652-00 that you referenced has a length from center to center of 5-1/4 inches to 6-1/4 inches and an over height of 2-1/4 inches from center to center.

The measurements of your current equalizer are close enough that this would fit and work well without any noticeable changes in ride height.

expert reply by: Jameson C