How to Pick Out Replacement Trailer Vent Cover Lid
Updated 09/21/2015 | Published 09/20/2015
Products Featured in This Question
Question:
Good Afternoon, I am looking for a replacement bathroom vent lid for a 1990 Holiday Rambler Crown Imperial. I see no markings on the existing assembly and have no information in the original owners manuals I have taken pictures will be glad to email you them. It has the old style pin hinge but I do no see anything on your website close to what I have. Regards,
asked by: Shawn H
Expert Reply:
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof.
Product Page this Question was Asked From
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- Tinted
- Ventline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Need Help Finding the Correct Replacement for my Roof Vent Cover
- Q&A: Is There A Complete Kit For Installing An Onan Generator In A Camper Van?
- Q&A: Is 72" Wide the Bracket or Sofa Measurement on the Thomas Payne RV Jackknife Sofa TP88KR?
- Article: How to Replace an RV Roof Vent Cover
- Q&A: Picking Out Roof Vent Lid for 2017 Heartland Wilderness
- Q&A: Replacement Vent Cover For Ventline AS-13-M-V101
- Q&A: Correct Replacement Cover For a Ventline Northern Breeze VB0568 Roof Vent
- Q&A: Replacement Metal Roof Lid for a VA530 RV Vent
- Article: How to Replace or Install an RV Roof Vent
- Article: Thank you!
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: Trailer Tire Sizing
- Article: Performance Chips and Modules
- Article: Best Vehicles to Flat Tow Behind an RV