Spare Tire Carrier Recommendation for a 19-1/2 inch Spare

Question

Question:

I need a spar carry that can be towed withthat will fit a19.5 rv wheel

asked by: Jim J

0

Expert Reply:

The Curt Spare Tire carrier part # C31006 will carry a 19-1/2 inch spare tire. We had a customer write us a review for this product and said that it worked well carrying his 19-1/2 inch spare.

As long as you aren't exceeding the capacity of your hitch with this carrier and spare you would be good to go.

expert reply by: Jameson C

0

Answer 1

You'd need a high capacity bottle jack like the Powerbuilt part #ALL647501 which has a 24,000 lb capacity. You'd also want a 4-way wrench for installing and removing the lug nuts. If you need a spare wheel and tire let me know what tire size…

view full answer...

Answer 2

We have two front mount receivers available for a 2004 F-450 cab and chassis. They are Draw-Tite part #65022 and Curt part #31114. I have added links to these parts and their install instructions below. I did some geometry with your 8 on 9 inch lug…

view full answer...

Answer 3

I spoke with my contact at CURT Manufacturing about hitch mounted spare tire carrier #C31006, and he stated that it will hold your 85lb spare, provided that the trailer hitch itself is also capable of supporting the combined weight of the spare and…

view full answer...

Answer 4

There is not a set weight limit for this Curt Trailer Hitch Mounted Spare Tire Carrier, part #C31006. As long as the hitch that is on your Class A Monaco Monarch Motor Home has tongue weight capacities that are above the weight of the carrier and…

view full answer...

Answer 5

We've had a few customers come back and tell us that Grade 8 1/2 inch diameter bolts, nuts, and washers worked great to mount their spare to the Curt spare carrier part #C31006.

view full answer...

Answer 6

The Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 does have a bit of an angle, you're right, but I can't recommend using any type of shim or adapter to change the angle. That said, the angle isn't extreme, as you can see by the…

view full answer...

Answer 7

Hey Sam, we recommend 1/2 inch grade 8 bolts and nuts for securing your wheel to the Curt spare carrier part #C31006. I wish we sold them but since we do not you'd need to check with a local hardware store.

view full answer...

Answer 8

I do have a solution for you however the Stromberg Carlson Folding Bumper Mounted Tire Carrier #TR-2 will not work with dually wheels. In order to mount your 75 pound Class C tire, I recommend looking into a hitch-mounted carrier like the Curt…

view full answer...

Answer 9

Hey Paul! The short range FastGun Turnbuckles are designed for bed-mounted tie-downs and I would definitely listen to what Kingstar recommends. These are only available in pairs and you will need a pair for the front and rear. You can choose from the…

view full answer...

Answer 10

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 11

Yes, you will be able to mount your 225/75R16 tire with a 8 lug wheel on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. I have included an image below with your same size tire and an 8-lug wheel mounted on the carrier.

view full answer...

Answer 12

We do have a potential solution for you. While we do not have any hitch mounted spare tire carriers with a built in swing away feature, we do offer swing away hitch extenders that will work well for this purpose. We recommend using a combination of…

view full answer...

Spare Tire Carrier Recommendation for a 19-1/2 inch Spare

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching