Axle and Suspension Hanger Placement on Tandem Axle Trailer
Updated 07/09/2015 | Published 07/08/2015 >
Question:
I am building an enclosed trailer for a mobile kitchen the box is 3mx2m and the entire length is 4.8m and I want to use two axles and I want to determine the distance to place my axles from the nose /coupler and the spring setup the spring is 27inch 4 blade, for 40mm 1200kg axle. Please help
asked by: Victor
Helpful Expert Reply:
The placement of the axles is going to depend on the gross trailer weight. I have included a picture that shows how to determine where the center point should be between the axles.
Placement of the hangers is going to require mocking up the hangers to determine where they are going to fit. But as a guide you can use the following as a starting point:
Distance between front and center hangers and between center and rear hangers, approximately 29-1/2 inches (74.93 centimeters).
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: e5226
- Search Results: trailer breakaway kit
- Video: Ventline E-Z Lift Ventadome Trailer Roof Vent Feature Review
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 95" Long - 7,000 lbs
- Shop: Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke
- Shop: Redline 2-Way Pop-Up Roof Vent with Garnish for Enclosed Trailers - Aluminum
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 160-lb Capacity
- Shop: Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - White
- Shop: Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - Birch Trim
- Search Results: ac rv
- Search Results: trailer tool box
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Article: Where to Position the Trailer Axle?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS


