Recommended Clearance Between Trailer Frame and Axle
Published 07/01/2015
Question:
I have a tandem trailer and have the axles over the springs, I have only 2 1/2inch clearance between the trailer frame and the top of axles. Is this enough clearance so when the trailer is loaded the axle and frame will not hit each other?
asked by: Matt
0
Expert Reply:
The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
expert reply by:
Victoria B
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Article: Redarc Tow-Pro Elite Full Review
- Q&A: Does Roadmaster Make the Long U-Bolt Kit part # RM33KT
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Troubleshooting Slanted Equalizer on Unloaded 7K Cargo Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Q&A: Can The etrailer Dual-Pin Two-Speed Jack Be Used For A Landing Gear Set?
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: Trailer Wiring Diagrams
- Q&A: How Does 2 Speed Gear Work On etrailer Dual-Pin 2 Speed Jack e45YV?
- Q&A: Replacement Front Mounted Trailer Jack For Cattle Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs