Replacement Tires for Trailer Dolly w/ 4.10/3.50-6 Tire

Question

Question:

I need two tires for my trailer dolly. 4.10/3.50-6. Would prefer flat free but will do tubeless. My problem is finding a 1inch bearing size. I can find lots of 3/4. Do you carry these?

asked by: Juanita W

1

Helpful Expert Reply:

Take a look at the Replacement Wheel for MaxxTow Trailer Dolly, # FHG23VR. This replacement wheel has a 1 inch wheel hub bore and a 4.10/3.50-6 tire.

This is our only option for that size of tire.

expert reply by: Leah S

1

Jeff J.

4/17/2020

This does not fit a 1 shaft. The bore is .942.I need one to fit a full 1 shaft

Chris R.

4/18/2020

I'm not sure we have a replacement wheel with an exact 1" hub bore diameter, but just to be sure, can you tell me what model dolly you have?

Jeffrey S.

12/15/2020

@ChrisR I have an Ultra-tow dolly. he .942 axle bore in correct, but what is the length of the bore. my axle needs a .942 x 3.5 lenth for the shaft. Will this fit?

Jon G.

12/15/2020

@JeffreyS The hub bore length is 3-7/8" so this should work for your application.

Brenn N.

6/18/2020

Mine is Tow Tuff TMD-800C Adjustable Trailer Dolly with Caster.. would the replacement tire fit....

Chris R.

6/22/2020

That's not a dolly we sell so I'm not sure what size tire it uses. If it matches the above specs then it may work, otherwise your best route will be to contact the manufacturer directly.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…

view full answer...

Answer 6

Hello Graham, thanks for reaching out. So far I have been pretty impressed with the PacBrake air bags. I would say they are in line with the quality of the Air Lift air bags. They use similar top plates. Pretty much everything about the design of…

view full answer...

Answer 7

Hi Bernie! From everything I could find about your 2025 Chevy Silverado 1500 Custom, the mirrors are the same as the higher trim models (see attached image). The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR will fit…

view full answer...

Answer 8

Hey Tracy, thanks for all of the information. Since your 2025 Silverado 1500 LTZ does not have the Adaptative Ride Control feature, I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88288. The…

view full answer...

Answer 9

Hi Jeff! The mirrors I recommend for your 2022 Chevy Silverado 1500 ZR2 are actually the ones you were looking at, the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR. Longview makes some of the best towing mirrors on the…

view full answer...

Answer 10

Hey Joseph! What you need the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH25HR. This is designed to fit your 2025 Chevy Silverado 1500 Z71 and it's the only hitch with diesel compatibility. What will you be using the hitch for?

view full answer...

Answer 11

Hey Mark, the SumoSprings kit part #SS45FR would be a great option for your 2025 Chevy Silverado 1500 and wouldn't be too harsh. While this does provide 1,500 lbs of additional support the SumoSprings kits are not known to be harsh like Timbrens…

view full answer...

Answer 12

Hey James, congrats on the new truck. The Timbren's need quite a bit of tongue weight on them to be helpful when towing, so what you're running into isn't too surprising. The only SumoSprings I have for a 2025 Silverado 1500 are item…

view full answer...

Replacement Tires for Trailer Dolly w/ 4.10/3.50-6 Tire

Continue Researching