Installation Method for Parts Included in Bearing Buddy Spindle Grease Seal Set # BB60002
Published 06/02/2015
Question:
I have searched online auctions sites and I believe I want to buy from you guys! Im was looking to buy 4 of your backing plate assemblies. I believe I have a bearing buddy seal on the inner side of my spindle. I checked all the dimensions and found your Spindle Grease Seal Set for LM29749 Inner Bearing and 1.980 Bearing Buddy. This seems to be the closest that I have. Now, I really appreciate your short training movies but this one I do not get. If you check the pictures to this item, there is an extra thin washer .... where does that go? Im I missing something? I may have a couple more questions later so thanks in advance.
asked by: Rick P
Helpful Expert Reply:
The flat steel washers included in the Bearing Buddy Spindle Grease Seal Set # BB60003 are the first part of the 4-piece assembly to be installed on each spindle. These are followed by the L-shaped steel seal ring, then the O-rings. The actual large grease seal itself is installed into the hub's bore and then mates up with those other three parts already on the spindle. The linked video illustrates the last 3 items but does not the flat steel washers.
Product Page this Question was Asked From
Spindle Grease Seal Set for LM29749 Inner Bearing and 1.980 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.88 Inch I.D.
- 2.56 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Spindle Grease Seal Set for LM29749 Inner Bearing and 1.980 Bearing Buddy
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Q&A: How Does the Spindle Seal Set part # BB60003 Install
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Does Trailer Tire And Wheel Combos Need To Be Balanced?
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Q&A: Selecting Bearing Buddy for Ranger Trail Boat Trailer
- Q&A: Bearing Buddy to Fit Ranger Tandem Trailer with Hub Bore Diameter 2.296 in
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Maintenance Schedule
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer