Electric Trailer Brakes More Aggressive After Changing Vehicles and Repacking Bearings
Updated 05/12/2015 | Published 05/11/2015
Question:
I just repacked the bearings by hand and looked at the brakes and the shoes had plenty of pad left. However, on my first trip after repacking the bearings, the brakes now feel more aggressive than it did before. It is quicker stopping and feels almost grabby. I also changed tow vehicles from 2014 model Ford Expedition to a 2015 Ford Expedition. I wipe off the grease as best as I can with a paper towel if I get some on the drum when repacking the bearings. Could the more aggressive brakes be caused by tiny bit of grease on the brake lining? If so, do I need to replace the brake shoes or will the work normally after awhile? Both the Expeditions have integrated brake controllers. I used to have the gain on 7.5 on the old Expedition and on the new one Ive set it at 4.0 and the brakes still seem aggressive. The trailer is a Jayco 2013 Eagle 304 BHS and the brakes are Dexter Never Adjust 12X2 K23-459 and 458. Thanks in advance for your answer.
asked by: Keith
Expert Reply:
If you were to get bearing grease on the brake pads then they are pretty much done and would have to be replaced because you will never be able to get all of the grease off of them.
It doesn't sound like grease is the problem though because the grease would make the brakes not work as well, not make them more grabby. I think the issue might actually not be an issue at all. I think the newer vehicle and brake controller are working a little better than the old one. It also might take a little time for the brakes to adjust after having the drums off.
I would just adjust the brake controller until you get the trailer brakes where you want them and let the self adjusting feature work its magic.
Continue Researching
- Search Results: trailer brakes
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Dexter Electric Trailer Brakes: The Breakdown
- Video: Comprehensive Review: Dexter Electric Trailer Brakes
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K - 50 Pairs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Video: Complete Breakdown of the Dexter Electric Trailer Brake Assembly
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly
- Video: All About the Grease Seal
- Shop: Trailer Hub/Drum - 5,200-lb - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Galvanized
- Q&A: How Important is it to Clean Grease off of Trailer Brake Assemblies/Drums
- Q&A: How to Avoid Over-Filling Hubs with Grease
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
on Accessories and Parts
