Does the Draw Tite Hitch # 24907 Require Drilling for Installation on a 2015 Nissan Sentra

Question

Question:

Does the Draw Tite Hitch part # 24907 Require Drilling to Install on a 2015 Nissan Sentra Thanks.

asked by: Juan C

0

Expert Reply:

Yes, the installation of the Draw-Tite Class I hitch # 24907 on your 2015 Nissan Sentra DOES require drilling. All hitch options for your vehicle (as long as it is NOT the SR version) can be seen on the link provided. The Curt # C11349 is the one that does not require drilling but it may require some enlarging of the frame access holes with a rotary tool or file. The written instructions and a helpful hitch installation article are linked for you.

If you plan to use a bike rack in your hitch please note you are limited to a 2-bike capacity on a Class I hitch. I have linked our main page for Class I-compatible bike racks and articles that cover how best to choose one for your car and your bikes.

expert reply by: Adam R

0

Ron N.

5/23/2020

Looking for trailer hitches for 2015 Nissan Sentra SR either 2 bike or 3 bike option.

Chris R.

5/26/2020

For the hitch itself I like the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT48MR for your 2015 Nissan Sentra. You won't be able to load 3 bikes onto it since a Class I hitch can only handle two, but there are plenty of Class I approved options that will work really well. I highly recommend the Kuat Transfer # TS02B, which offers a sleek, wheel-mount carrier at a really nice price point.

Answer 1

It sure will Xavier. The Curt Hitch item #C88EQ does indeed fit the SR model of the 2024 Nissan Sentra. This custom fit class I hitch has a 1-1/4" receiver, which provides a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. It…

view full answer...

Answer 2

It sure will Jacob. The Curt Hitch item #C88EQ does indeed fit the 2026 Nissan Sentra SL. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a maximum tongue weight of 200 lbs. It is custom fit and comes with…

view full answer...

Answer 3

Both the Draw-Tite Sportframe Trailer Hitch Receiver #24907 and the Curt #C11349 exclude the SR model. I reached out my contact at Curt and found out that the reason they are excluded is because of excess trim and an exhaust rattle. They don't…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 11

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 12

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Does the Draw Tite Hitch # 24907 Require Drilling for Installation on a 2015 Nissan Sentra

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching