Replacing Bearings, Races, And Seals On 2000 Coleman Pop-Up Camper
Updated 05/05/2015 | Published 05/03/2015
Question:
Looking for what bearings, race and seals I would need for a 2000 Coleman Utah pop-up.
asked by: Frank K
Expert Reply:
The best way to make sure you get the correct replacement bearings, races, and seals on your 2000 coleman Pop-up is to find the numbers stamped onto the metal of the inner and outer bearings that are currently on the trailer. With those you will be able to find the correct replacement bearings, races, and seals from the attached product page.
If you are unable to find the numbers you will need to measure the spindle of your trailer with a digital or dial caliper to get the diameter of it where the seal, inner, and outer bearings ride as the attached drawing shows. I have also attached a link to a video on inspecting trailer bearings that should help you when removing the old bearings.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: akebrk
- Search Results: axletek 10" x 2 1/4" electric brake assembly
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Search Results: trailer bearings races seals caps
- Search Results: dexter nev~r~adjust
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Suspension Enhancement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer wiring
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Bearings Races Seals Caps
