What to do With the Extra Wires on 4 to 7 Pole Adapter for a Camper Trailer
Updated 04/05/2010 | Published 04/02/2010
Products Featured in This Question
Question:
I bought the 4 to 7 wire adaptor and was wondering. Mr camper has a 7 flat on it but the only thing we need is the tail lights and brake lights. Can we rewire that and if not what do I need to do with the extra wires to just get the lights to work.
asked by: Dennis F
Expert Reply:
On the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, # 30717, the extra wires can be taped off, tied up with a cable tie, and tucked out of the way if not in use. I would attach the white ground wire to an existing grounding point or the vehicle frame even if you do not intend on adding a brake controller (which is what the other wires are for).
You would then attach the vehicles 4-Way into the 4-Way end of the adapter and plug your trailer connector into the 7-Way for lights only.
If you ever decide to add a brake controller (and if your trailer already has electric breaks it is probably a good idea) we have many to choose from. I recommend the Tekonsha P2, # 90885. Since, you already have a 4-Way connection at the rear of your vehicle, you would just need a 7 and 4 Way Installation Kit, # ETBC7, to hard wire the vehicle for a brake controller.
I have included the instructions for the Prodigy below as well as an FAQ on brake controller wiring from scratch should you decide a brake controller is the way to go.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 30717
- Search Results: hydraulic brake hose
- Search Results: hydraulic hose
- Search Results: electric over hydraulic
- Search Results: 22292
- Search Results: electric over hydraulic trailer brake controller
- Q&A: Can You Convert 4 Way Plug To Work With Trailer Brakes?
- Search Results: electric brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: 2018 Ford E-450 Super Duty Brake Connector Install Harness Location
- Shop: Demco Straight Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,000 psi
- Article: Adding Electric Over Hydraulic Disc Brakes
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-9065 Review
- Q&A: Is Replacing the Surge Brake Coupler Required When Converting to EOH Brakes On a Boat Trailer
- Q&A: Can a 4-Pole Trailer Connector Be Used to Activate Trailer Brakes
- Shop: Brake Controller
- Shop: Windshield Covers
- Shop: Demco Hydraulic Brake Hose with Fittings - 19" Long
- Shop: DeeMaxx Alpha Electric Over Hydraulic Actuator for Disc Brakes - Plug & Play Kit - 1,600 psi - Black
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Video: Remove and Reinstall a Trailer Hub Review
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Brake Controller Install Harness Needed for 2018 Ford E-450
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
on Custom Fit Vehicle Wiring
