Will CE Smith Deep V Keel Roller # CE10455G Prevent Front of Boat From Hitting Crossbeam on Trailer

Question

Question:

can this be used on the front of the keel? my boat keel hits a cross beam on a venture trailer and needs to be protected. or do I need a keel rest?

asked by: John C

0

Expert Reply:

Yes, the CE Smith Deep V Keel Roller, # CE10455G, can be used on your trailer to prevent the front of the keel on your boat from hitting the cross beam. This roller will not only support your boat keel but will also help ease loading and unloading of the boat as well as absorb road shock while the boat is being trailered.

expert reply by: Leah S

0

Answer 1

I had this pulled and measured for you. The distance from the top of the widest point of the roller and the bottom of the mounting plate of the CE Smith Deep V Keel Roller Assembly for Boat Trailers, part #CE10455G, is 8-1/2". I've included…

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 6

Hey Paul, thanks for reaching out. I think the Tie Down Roller Bunks #TD87FR are a good direction for what you are trying to fix. I would not mount them on top of 2x4 bunks though, since your main problem is already that the boat sits too high. The…

view full answer...

Answer 7

The CE Smith Deep V Keel Roller Assembly #CE10453G would work great to help center the boat as you load it onto the trailer as well as provide some additional support. I'd go with the wider version part #CE10455G which has a 12 inch roller on it.…

view full answer...

Answer 8

Hey Danny. I took a look at our options and I do not have anything in a 9" roller and bracket that's going to work for your Holsclaw boat trailer. We have quite a few keel rollers like the 12" Wide item #CES94JR. You would need the…

view full answer...

Answer 9

Hey Dean. Unless your trailer already has brackets, you'll want to use the CE Smith Galvanized Steel Step for Trailer Fender item #CE26212G to attach the CE Smith Single Axle Trailer Fender w/ Top and Side Steps item #CE19504 to your trailer. The…

view full answer...

Answer 10

To install the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19503-2 you need 4 of the CE Smith Galvanized Steel Step #CE26212G. The mounting hardware isn't included because every trailer design is different so you can either use…

view full answer...

Answer 11

The frame brackets that come with the CE Smith Post-Style Guide-Ons for Boat Trailers part #CE27637 are 4" wide.

view full answer...

Will CE Smith Deep V Keel Roller # CE10455G Prevent Front of Boat From Hitting Crossbeam on Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching