Can a Curt Weight Distribution Shank be Used with a Blue Ox Weight Distribution Head
Updated 02/23/2015 | Published 02/22/2015
Question:
Will a curt shank fit a blue ox sway control head? The holes are spaced the same, but are the holes the same size?
asked by: Erik
0
Expert Reply:
If your Blue Ox head bolts on using 3/4 inch diameter bolts that are spaced 1-1/4 inches apart on center then you could use a different shank such as Curt shank # C17123 which has a maximum drop of 8-1/4 inches.
Nearly all brands of weight distribution systems use the same dimensions for the shanks so it is not uncommon to use a Curt shank with a different brand head as long as the holes match up.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Pilot Diameter on a Wheel
- Q&A: Recommended Weight Distribution Hitch for 2022 Grand Design Imagine XLS 21BHE
- Q&A: Trying To Decide Between Reese Dual Cam II And Reese Strait Line
- Q&A: Can The Curt MV Weight Distribution System Be Used With Curt Deep Drop Ball Mounts?
- Q&A: Do You Have an Updated Diagram for the BulletProof Hitches Weight Distribution Shank BPH75RR?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: How Far Apart are Hitch Pin Holes of Bulletproof Weight Distribution Shank BPH75RR
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Different Types of Light Bulbs Used in Trailer Lights
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Determining Trailer Tongue Weight
- Article: Anti-Rattle Devices